Netgear Repeater Setup Process

Quite a predicament it is to find yourself in when you open the new Netgear Range Extender that you just bought and have no idea what to do with it. The terms like and Netgear range extender setup wizard mean absolutely nothing and you’re left there wondering what to do with the device in hand.

We get what your position is and we wish to resolve all your queries related Netgear repeater setup and provide answers to any questions related to Netgear wifi extender setup instructions. With the below mentioned information, you will be able to find extensive support and top-notch information about Netgear wireless devices including information pertaining to mywifiext net setup wizard. You can get in touch with us in case you need any query resolved which the document provided below can’t solve. Simply call us on our toll free number or chat live with us and we’ll together complete your Netgear repeater setup process.

netgear extender

The Netgear repeater setup process needs a user to find the default password to be completed. While all this information has been provided extensively by the Netgear Corporation across many documents available online, we have compiled all of it and written it down below. To setup Netgear wireless repeater, follow the steps mentioned below.

Setup process:

All Netgear Range Extenders are setup using the similar steps that are mentioned below. Primarily there are 2 ways to setup Netgear wireless repeater, one is wired and the other is wireless.

As the name suggests wired setup process will need an Ethernet cable connected to the Laptop or PC being used to set it up. The wireless connection on the other hand, although being a little unreliable, allows the ease of being cleared away from wires. The wired method however is the recommended to be used.

Along with the above, the Netgear wifi extender setup also needs a couple of physical connections before you could begin with the setup process. These steps are mentioned below as:

  • Make sure that your Netgear Range Extender is right next to the Range extender as you are completing the initial setup process.
  • Connect all the devices involved in the Netgear wifi extender setup to the power source to power them up.
  • Your wireless range extender will now start lighting up a green light.
  • Once the green light comes up during the Netgear wifi extender setup, restart the device.

Netgear wifi extender setup instructions will contain the following few steps which will let you setup the Netgear repeater device. Just follow the steps to also gain access to the Netgear range extender setup wizard:

netgear extender setup

  • Step 1: Use either of the 2 methods (wired or wireless) to connect to the Laptop or the PC you’re using to set it up with. For wireless, connect the device to the SSID of the Netgear wireless repeater. For wired connection you would only need to connect it to the Ethernet cable.
  • Step 2: Once you have had the connection completed successfully, carry forward the Netgear repeater setup by opening a web browser.
  • Step 3: Next, you would be needed to go to the Netgear wifi extender setup page using the web address
  • Step 4: Netgear range extender setup wizard will launch after logging in. Create new account if you don’t have any and gain access to the Netgear repeater setup page.
  • Step 5: Enter the correct credentials to gain access to the web page.
  • Step 6: The mywifiext net setup wizard will start searching for wireless connections to connect your new range extender to.
  • Step 7: Choose the wireless network which has to be extended. The 2.4GHz and the 5GHz wireless connection both can be extended by your Netgear wireless range extender. Your device, however, has to be configured to do that.
  • Step 8: Choose the channel that you wish to extend and choose the appropriate security for it and select a security key or password to log into it.
  • Step 9: Now we will try to log into the device using a laptop or a computer to ensure that you have successfully set up the range extender. If for some reason you are unable to login to the new wireless range extender, return to the admin page once again. You will have to restart the Netgear repeater setup process to ensure proper installation.
  • Step 10: Once you are able to connect to the new wireless device, you will be asked to log in to a new Netgear account.
  • Step 11: Disconnect the Range extender from where it was connected next to the wireless router. You can now choose to head over to the place where you need to extend the wireless connection.  Just ensure that you have installed the new device close enough to the wireless router so that it’s able to receive at least 50% of the wireless connection.
  • Step 12: Find the appropriate SSID related to the Netgear wireless repeater and connect to it using a wireless device. You are now ready to surf the internet using the new Netgear Wireless repeater.

Hence with the use of the Netgear range extender setup wizard, your overall setup process will be simplified and your device will be good to go in no time.

If for some reason you have some issues while or after the Netgear range extender setup has completed, the below mentioned FAQs will be able to help you with Netgear extender setup/login and resolve a lot of your issues.


There are two ways to reset your device even after the completion of Netgear repeater setup. The below mentioned steps will help you:  
  • A small button placed right behind the device is the reset button which we will be using now. Since it is embedded in a cavity, you will not be able to reach it unless you are using a pin or a paper clip. Press and hold down this button for at least 5-10 seconds. Once the lights on the range extender starts blinking you are ready for the further steps.
  • Release the pressure off of it.
  • The device will continue to reboot for a while, let it reboot.
  • Once the reboot process is complete, go ahead and reinitiate the Netgear wifi extender setup process.
Another method to reset the Netgear device is to software-reload it:
  • Head over to the Add WPS Client option and choose Maintenance. Go now towards the Backup Setting page. Press the 'Erase' button. Netgear range extender will confirm the command by showing you a dialogue box asking to confirm the same. Click 'Yes' to proceed or click 'No' to cancel this.
  • Move on with the Reset. You will then be asked setup Netgear wireless repeater again.
To securely establish a wireless network in an easy manner, Wi-Fi Protected Setup (WPS) has been used by people around the world. It allowed the user to configure a wireless network to quickly complete the Netgear extender setup process. There are 2 ways to configure WPS:
  • PIN (Personal Identification Number) one of the method. It uses a PIN which is available on the sticker label or on the web interface of the WPS device. AP or client’s WPS device uses this pin by entering into the wireless console to connect to the Netgear Wireless Range Extender.
  • PBC (Push button configuration); a method where a user has to simply push a button. Push this button on both of the WPS devices.
There has been a continuous effort by organizations around the world to increase the data space or at the very least, share it appropriately across all the platforms. In order to provide this and so much more, Netgear Corporation created the ReadySHARE platform where using a Netgear Range Extender, a Netgear Range Extender owner can share the data on a digital space with a single USB drive.
Netgear periodically rolls out important updates which increase both the security and the productivity of the device itself. Hence, it becomes more than important to complete the Netgear extender setup. You would also be needed to check the latest firmware before installing a new one.
  1. Start a web browser, go to
  2. In the search box provided, enter your device’s model number.
  3. Once the drop down menu opens, select the model number of your
  4. Go to the Firmware and Software Downloads tab.
  5. Once you are on the Current Versions tab, search for and choose the firmware version appropriate for your device and the one that you wish to download; press Download.
  6. Unzip the downloaded file and select the .exe file. 
  7. Look for the onscreen instructions and update the firmware version.
Netgear extenders have been known to be universally acceptable and configurable by a large number of devices from around the world. This includes modems and routers which are compatible with them. Even the modems shared with the ISPs themselves work brilliantly with the Netgear Wireless repeater. There are still things that you need to make sure of: Netgear Wi-Fi extenders have been known to operate on both the 2.4GHz and the 5GHz band. Although, if the Wi-Fi router you own only supports a single 2.4GHz band range extender’s perform will vary depending upon available bands. Also make sure that your Netgear wireless range extender tends to the regulations that are running in your geographical location. The network and the power standards are to be checked here most importantly of the geographical area that you’re using it from.
When the wireless device connects to the extender, the MAC address of the wireless device is translated to another MAC address. If you have enabled the MAC filter on your router, the devices that you are connecting to the Netgear Wireless Range entender, will not be get the IP address. the translated MAC address must be added into the router to allow this wireless device to access the internet. To get the translated MAC address:
  • The first thing that you need to do is to log in to your router. Disable the MAC filter, wireless access control, or ACL on the wireless router.
  • Turn on the extender and connect all the WiFi devices that you wish to run to the extender network.
  • Log in to the Netgear Wireless Range Extender.
  • Go to Settings and then go to the Connected Devices.
  • The MAC addresses/Virtual MAC addresses of the extender/wired devices/WiFi devices that are connected to the extender are all shown on the Connected Devices page displays.
  • Head over to the router. Go ahead and approve virtual MAC addresses of the Netgear Wireless range extender and all the devices connected to it.
  • Restart the router’s MAC filter, wireless access control, or ACL.